Effect Command - MA lighting dot2 User Manual

Presets Pools

8.19. Effect Command

This page describes the syntax and how to use the
To go to the Effect command, press
Description
With the Effect command, you can start effects for the selected fixtures by using the effect object number.
The effect object numbers are in the upper left corner of an effect tile. For more information, refer to
Syntax
Start dimmer effect 3 for the selected fixtures.
At Effect 3
Example
Let´s assume, you will start dimmer effect 3 for the selected fixtures.
Press At Effect 3 Please
Dimmer effect 3 starts for the selected fixtures in the programmer.
Hint:
You can also just tap on the effect in the
with Effects?
8.20. Executor Command
This page describes the syntax and how to use the Executor command.
To go to the Executor command press
Executor is in the command line
Executor
Description
With the Executor command you can, e.g.
select all fixtures stored on an executor
delete executors from the
delete cues from executors
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Effect
Effect on the console.
.
dimmer effect
Exec on the console.
now.
executor pool and the respective executor button on the console
command.
view. For more information, refer to
effects view.
How to work
402