Plus] Command - MA lighting dot2 User Manual

8.4. + [Plus] Command

This page describes the syntax and how to use the + [Plus] command.
Description
With the + [Plus] command you can:
Add objects to a selection list
Add the dimmer value
Call the next page
Syntax
1. Add objects from a list:
+ 5
2. Add dimmer values:
At + 12
3. Call next page:
Page +
The + [Plus] command is a helping command and needs a further command or a number.
Example 1
Let´s assume, you have a long selection list with fixtures and you will add one to them.
Figure 1: Fixture selection list - one fixture is missing
Press + 5 Please on the console.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
376