MA lighting dot2 User Manual page 427

Hint:
If you move a preset type what is used in a cue, the assignment in the cue will redirect automatically to
the new preset type number.
1. Open the color presets pool.
There are two ways to do this.
a) Press Move Preset 2 At 5 Please
b) Press Move , tap on color preset 2 in the color presets pool, and then tap at object tile 5 .
Color preset 2 is moved and is now color preset 5.
Example 3
Let´s assume, you will move the executor from position 1 at position 6.
There are three ways to do this:
a) Press Move Exec 1 At 6 Please
b) Press Move , tap on executor 1 in the
c) Press Move , press executor button 1
The executor is moved from position 1 at position 6.
Example 4
Let´s assume, you will move executor 1 from page 1 at page 2.
There are three ways to do this:
a) Press Move Exec 1
b) Press Move , tap on executor 1 at page 1 in the
c) Press Move , tap on executor 1 at page 1 in the
Executor 1 is moved from page 1 at page 2.
Example 5
Let´s assume, you will move the main executor to executor 6 on page 1.
There are three ways to do this:
a) Press Move and then one of the large main executor buttons, e.g. the large Pause and then press executor
button 6 .
b) Press Move Exec 0 . 1 . 1
c) Press Move , tap on main executor in the
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
.
.
executor pool
on the console and then press executor button 6
(=Page 1) . 1 (=Executor 1)
executor pool
executor bar view
(= Main Executor]
executor bar view
and then tap on executor 6 .
At Exec 2 (=Page 2)
and tap on executor 1 at page 2.
and tap on executor 1 at page 2.
At Exec 1 (=Page 1)
and tap on executor 6 at page 1.
at the console.
. 1 (=Executor 1) Please
. 6 (=Executor 6) Please
.
.
427