Label Command - MA lighting dot2 User Manual

Let´s assume, every second fixture from group 1 is selected in the fixtures view to assign them a blue color.
Now, you will select all other from group 1 to assign them an other color.
Figure 1: Every second fixture of group 1 are selected
1. Press Macro on the console. The
2. Tap at Macro 22 "Invert" , press
All other fixtures in group 1 are selected to assign them an other color.
Figure 2: The other fixtures of group 1 are selected
Example 2
Let´s assume, you have fixture 1, 3 and 5 selected. Now you will select fixture 2 and 4.
Figure 3: Fixture 1 + 3 + 5 are selected
1. Press Macro on the console. The
2. Tap at Macro 22 "Invert" , press
The fixture selection from fixture 1 thru 5 is inverted. The fixture 2 and 4 are selected.
Figure 4: Previous fixture selection is inverted

8.35. Label Command

This page describes the syntax and how to use the label command.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Macros Pool View opens.
Group 1 Please .
Macros Pool View opens.
Fixture 1 Thru 5 Please .
420