MA lighting dot2 User Manual page 460

Control console

Hide thumbs Also See for dot2:

Table of Contents

delete cues and all following cues, from an executor button

1. Select all fixtures in fixtures view.

Fixture Thru

2. Select the a range of a fixtures in the fixtures view.

Fixture 5 Thru 10

3. Delete cues and all following cues, from the main executor.

Delete Cue 3 Thru

4. Delete cues and all following cues, from an executor button.

Delete Cue 3 Thru Executor 2

The Thru command is a helping command and needs a second command or a number.

Let´s assume you will select all the fixtures in the show.

Figure 1: Selected fixtures

(=Fixture Thru)

All fixtures in the show are selected.

Let´s assume you will select fixture 5 thru 10.

Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com

d o t 2 U s e r Ma n u a l