Examples
Here are a few examples how you can use the learn command.
Example 1
Let´s assume, you will set the speed of a chaser.
Press and hold
Speed
(= Learn) and press the executor button of the chaser several times in that speed you like to
have it.
The chaser learns the speed of the tapping of the executor button.
Example 2
Let´s assume, you will set the speed of an effect.
Press and hold
Speed
(= Learn) and press the executor button of the effect several times in that speed you like to
have it.
The effect learns the speed of the tapping of the executor button.
Example 3
Let´s assume, you will set the speed of the master rate.
Press and hold
Speed
(= Learn) and press the executor button of the master rate several times in that speed you
like to have it.
The master rate learns the speed of the tapping of the executor button.
8.37. Macro Command
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
423