MA lighting dot2 User Manual page 258

d o t 2 U s e r Ma n u a l
Figure 6: Fixtures view - sheet view
In the fixture sheet view are all patched fixtures, and their values and attributes, in a numeric order of the fixture ID.
In the first column is the fixture ID displayed. In the second column is the fixture name displayed. Those two columns
are fixed.
After the fixture name column are the attributes displayed, in the same order like the preset type bar.
If you use a preset, the name of the preset is displayed instead of the value.
Figure 7: Fixtures sheet view with used preset contrabass
To adjust the column width, press and hold the vertical column line next to the column header and move the
column.
To edit attribute values in the fixtures sheet view, select a fixture and tap and hold the value cell from the attribute.
The calculator opens.
To learn more about the different colors in the sheet view, refer to value colors.
If blind is on, the blind values are only visible in the sheet view. For more information, see Blind key and Blind
command.
258
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com