MA lighting dot2 User Manual page 216

Remove:
Tap to remove the programmer values from the existing cue.
Overwrite:
Tap to overwrite the existing cue with the programmer values. The previous values from the existing cue are deleted.
Create second cue:
Tap to create a cue 2 with the programmer values. This will create a cue list.
If you store new programmer values in an existing cue, the store method window has additional the options
Normal
Cue Only
Figure 2: Choose store method window - store in an existing cue
Additional to the methods Merge, Remove, and Overwrite, you can select the Store Mode.
Store Mode Normal:
Tap to store the cue with tracking shield. Refer to,
Store Mode Cue Only:
Tap if to store the cue between two other cues. The stored cue will not affect the following cues with tracking
values.
Normal
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
What is Tracking?
216