MA lighting dot2 User Manual page 202

d o t 2 U s e r Ma n u a l
Strobe Duration
To select the strobe duration in seconds, move the strobe duration slider up or down.
Iris
To select the iris width in percent, move the iris slider up or down.
There are five iris value buttons right beside the iris slider (depending on the fixture type).
Open:
Tap to open the iris.
Close:
Tap to close the iris as much as possible.
Strobe:
Tap to use the strobe effect from the fixture.
Pulse Open:
Tap to use the pulse open effect from the fixture.
Pulse Close:
Tap to use the pulse close effect from the fixture.
Prisma 1 View
The Prisma 1 View is the second tab of the beam preset type view.
In the prisma view, you can select a prisma and use prisma functions from the selected fixture.
To select a prisma, tap on the prisma.
202
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com