MA lighting dot2 User Manual page 287

The Magic Speed view includes the four special masters.
If a special master is on, the fader is displayed in grass green.
If a special master is off, the fader is displayed in olive green.
For more information about the icon buttons and their functions, refer to Icons.
Master Speed:
Controls the speed of effects in cues and the playback speed of chasers.
If an executor should not be controlled by the master speed fader, go to the
Master Rate:
Controls the rate of the trig time, fade, and delay.
If the master rate fader is used, the trig time, fade, and delay times in the cue list are indicated by an
Figure 2: Main Cue List with used Master Rate
If an executor should not be controlled by the master rate fader, go to the
Exec Time
(= Executor Time):
Overrides the cue fade and on/off times. Sets the cue delay to zero. The Trig Time and Trig Follow are excluded.
If the exec time is used, the fade and delay times are indicated by an
Figure 3: Main Cue List with used Exec Time
Prog Time
(= Programmer Time):
Controls the fade time of the programmer.
Encoder Bar Functions
The default encoder speed is without decimal place.
To change the encoder speed to slow, press the encoder key
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
. The encoder speed is with decimal place.
Settings of Executor.
Settings of Executor.
equal =
.
asterisk *
.
287