MA lighting dot2 User Manual page 113

Control console

Hide thumbs Also See for dot2:

Table of Contents

d o t 2 U s e r Ma n u a l

The dot2 is technically a command line console. Everything that happens is also a command that's executed in the

command line.

To learn more about the actual commands you can write, please have a look at the

commands section

manual (also link below).

This is what the command line looks like:

It's almost always visible on the right screen. If you tap this then you open the Command Line view. It could look like

Here you can use the onscreen keyboard to type in the commands and you can see the command history and the

response from the console. You can also use an external keyboard in the command line.

When the command line have the focus, then you can use the

keys to select previously used

commands - then you can execute the command by pressing the

key. You can also use the up and down

arrows on an external keyboard.

The command history is also a view you can have visible on one of the internal screens or on the external screen.