MA lighting dot2 User Manual page 279

Control console

Hide thumbs Also See for dot2:

Table of Contents

Selects the align mode <. Refer to,

Selects the align mode >. Refer to,

5. Align <>:

Selects the align mode <>. Refer to,

6. Align ><:

Selects the align mode ><. Refer to,

7. Align Off:

Turns the align mode off. Refer to,

8. Circular Copy >:

Copies all values of the selected fixtures one step to the right.

This is useful to create a chaser.

Figure 2: Before circular copy >

Figure 3: After circular copy >

9. Circular Copy <:

Copies all values of the selected fixtures one step to the left.

This is useful to create a chaser.

10. Clear All:

Clears the selection and removes all values from the programmer. Refer to,

11. Clear Selection:

Clears the selection of fixtures. Refer to,

12. Clone single Preset Type:

Clones a single preset types from one fixture to another fixture.

Useful if you have an existing show and you get additional fixtures in the show.

Fixture 1 thru 4 uses color preset light cyan.

Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com

d o t 2 U s e r Ma n u a l