MA lighting dot2 User Manual page 56

Control console
Hide thumbs Also See for dot2:
Table of Contents

Advertisement

When you press this, then you get a drop down list.
If you do this in the type field then we get a list of the fixture types that already exists in our show. When we added
the Cheuvert Colordash Hew 7's, we took a copy from the fixture library and copied it into our show.
We need to do the same with the GLP X4's. Press Select others... and find the GLPs (impression X4 -
"Compressed" mode). When you have found them you need to press the OK in the upper right corner.
The quantity should be 6.
We need to give them a Fixture ID. Press Select... next to the ID field. This opens the Select Fixture ID pop-up.
Here you can see the occupied fixture IDs and the name of the fixtures who has them. Select 31 and press OK in
the upper right corner.
We haven't bothered with the name so far and we are not really going to begin now. But I will tell you one thing
about naming. When you write something for a name and the make a space and then a number, then the rest of
the fixtures will be enumerated from that number.
Let's give them a patch. Press the three dotted drop down list symbol in the patch input field. This give you a
different option for selecting a universe and an address. If you know the start address you can also just type this using
the numeric keys.
We need to patch the GLPs at universe 3 address 1 - this is typed
We are not going to add an Offset.
Now we can press the OK button in the upper right corner.
That was the GLPs. We still need to add the Clay Pakys.
The process is the same, so I'll just give you the information you need:
Clay Paky - Alpha Profile 700 - Standard Lamp on
9 fixtures
Beginning fixture ID is 41
The patch address is 4.1
No Offset
When you added them, then we can leave the Fixture Setup view by pressing the Done in the upper right corner
and Apply the Changes .
Notice the extra fixtures in the fixture view.
Arrange the new fixtures in the number 2 Fixture Layout View according to the plot.
In the next chapter we are going to look at controlling all the extra features we just got.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
3.1
.
56

Advertisement

Table of Contents
loading

Table of Contents