MA lighting dot2 User Manual page 244

Direction <>:
The direction <> button is available if you have fixtures with a running effect in the programmer.
Tap to change the direction of the effect from left to right or reversed.
Shuffle Selection:
The Shuffle Selection button is available if you have selected fixtures in the programmer.
Tap to mix-up the order of the fixture selection. This is the same as Macro "Shuffle Selection" in the
Sync:
The Sync button is available if effects are running in the programmer.
Tap to synchronize effects in the programmer. Refer to,
Align >:
Selects the align mode >. Refer to,
Align <:
Selects the align mode <. Refer to,
Align ><:
Selects the align mode ><. Refer to,
Align Off :
(default)
Turns the align mode off. Refer to,
Dimmer Effects
In the dot2 are six predefined dimmer effects available.
Soft Dimmer
(object number 1):
Opens and close the dimmer with softness.
Figure 5: Soft dimmer effect
Hard Dimmer
(object number 2):
Opens and close the dimmer without softness.
Figure 6: Hard dimmer effect
Ramp Up Dimmer
(object number 3):
Dimmer snaps to 100% and fades slowly to 0%.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
SyncEffects
Align Key.
Align Key.
Align Key.
Align Key.
Command.
Macros Pool.
244