MA lighting dot2 User Manual page 405

Control console

Hide thumbs Also See for dot2:

Table of Contents

in a existing cue

1. Go to cue 2 with a fade time of 3 seconds.

Goto Cue 2 Fade 3

2. Create a new cue 1 with a fade time of 3 seconds.

Store Cue 1 Fade 3

3. Assign a fade time of 5 seconds to the existing cue 3 on executor 1.

Assign Fade 3 Cue 1 Executor 1

Let´s assume, you will go to cue 2 on executor 1 with a fade time of 3 seconds.

Goto Cue 2 Exec 1 Time

The console goes to cue 2 on executor 1 with a fade time of 3 seconds.

Let´s assume, you will store a new cue 1 on the main executor with a fade time of 3 seconds.

Cue 1 is stored on the main executor with a fade time of 3 seconds.

Let´s assume, you will assign the existing cue 3 on executor 1 with a fade time of 5 seconds.

Double check the fade time in the