Synceffects Command - MA lighting dot2 User Manual

Control console

Hide thumbs Also See for dot2:

Table of Contents

Figure 1: Fixtures Sheet before store with StoreLook

Figure 2: Fixtures Sheet after store with StoreLook

(=StoreLook) and the respective executor button

All dimmer values are stored.

All attributes are stored if the dimmer value was bigger than 0.

For more information about the colors in the

8.61. SyncEffects Command

This page describes the syntax and how to use the SyncEffects command.

If you type the SyncEffects command in the console, by press and hold

the command will be directly executed.

You can also use the command line along with the virtual keyboard and type the word SyncEffects in.

To go to the SyncEffects command press and hold

The command will be directly executed.

With the SyncEffects command, you synchronize all running effects.

Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com

d o t 2 U s e r Ma n u a l

sheet, refer to

System Colors - Values.

(=SyncEffects) on the console.

(=SyncEffects),