MA lighting dot2 User Manual page 363

Figure 2: Red color indicator
Red color indicates that this value comes from the programmer and you can store it.
Figure 3: Red frame indicator
The red frame indicates this value comes from the programmer.
Raw Video Views
The raw video views are located after the smart view
Figure 4: Raw video view
Important:
The video sliders works absolute. A tap on a video slider sets a new video value and does not follow the
already set video values.
The respective encoders works relative to the already set video values.
In the raw video view, you control the raw video values in
Encoder Bar Functions
Figure 5: Encoder Bar - Video Preset Type
In the upper left corner of the encoder is the corresponding slider displayed.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
natural values (0-100) of the selected fixture type.
363