MA lighting dot2 User Manual page 208

d o t 2 U s e r Ma n u a l
7.7. Calibrate Screens Window
Calibrate Screens Window Console Calibrate Screens
The is located in the Setup, column , .
If the touch screens are not working proper, you can open the calibrate screens window only by using the encoders
as well.
In this view, you calibrate the screen.
A screen calibration makes sure that the touch function on your screen is working well.
To calibrate the screen. Touch and hold the highlighted cross until the progress bar reaches the end.
Select the screen with the first touch in the cross. If necessary, repeat the calibration for all other screens.
To cancel the screen calibration, press Esc on the console.
Calibrate Screens Window
If you do not touch the screen, the close automatically after 10 seconds.
7.8. Change Functions of Executor Window
208
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com