Rate Command - MA lighting dot2 User Manual

Hint:
To step thru the cue list backwards, press

8.50. Rate Command

This page describes the syntax and how to use the rate command.
To go to the rate command it is necessary to press another function key before, e.g.
Description
With the rate command you can store on an executor a:
Master Speed
Master Rate
For more information about what is a master speed or a master rate, refer to the glossary.
Syntax
Store a master speed or master rate on an executor.
Store Rate
Example
Let´s assume, you will store a master rate on executor 6.
There are four ways to do this:
a) Press Store Speed (= Rate)
b) Press Store Speed (= Rate) and press the respective executor button
c) Press Store Speed (= Rate) and tap on executor 6 in the
d) Tap on empty executor 6 in the executor bar view. The
[Store]>[Speed]>[Executor] , then tap Master Rate .
8.51. Record Command
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Prvw Prev
Exec 6 Please .
empty executor window
.
Store
.
executor bar view.
opens. Tap
and then Speed .
443