MA lighting dot2 User Manual page 229

d o t 2 U s e r Ma n u a l
Control Preset Type View
To go to the , tap Control in the Preset Type Bar.
- or -
Press and hold and press 7 , for preset type 7 (= Control).
The control preset type view is only active if the selected fixture type has a control channel.
control view raw control views
The control preset type view has one default tab and depending on the fixture type .
Control View
The control view is the first tab of the control preset type view.
In the control view, you control the control channels of the selected fixture types.
Except the three buttons on the bottom of the view, the buttons are depending on the selected fixture types.
The three buttons at the bottom of the screen are default buttons.
The buttons above the default buttons are different depending on the fixture.
If you tap at one of these buttons, a progress bar appears until the function is finished.
It is not possible to cancel a started functions or undo it.
Lamp On
(only for discharge lamps):
Tap to turn the lamp on.
229
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com