MA lighting dot2 User Manual page 386

Control console

Hide thumbs Also See for dot2:

Table of Contents

To go to the

command press and hold the

command, you can call:

Presets from the preset pool into the

The status of a cue as actual output and the values of the cue into the programmer as storable values, but

without selecting the fixtures

1. Call a preset from the preset pool into the programmer.

Call Preset 1.1

2. Call a cue.

Let´s assume you will call the dimmer preset 1 from the dimmer preset pool (= 1) into the programmer.

Press and hold

The dimmer preset 1 is in the programmer for all supporting fixtures of these preset type.

Double check the programmer values in the

Let´s assume, you will store a cue 4 (= green background and actor on stage).

The light for actor on stage is currently in the programmer along with the selected fixtures.

Now, you call cue 3 (= green background) to the current selection of fixtures and values into the programmer.

Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com

d o t 2 U s e r Ma n u a l

for all supporting fixtures of these attributes

Preset 1 . 1 Please

Fixtures Sheet

on the console.