MA lighting dot2 User Manual page 212

Control console

Hide thumbs Also See for dot2:

Table of Contents

Fixture 1 stored on executor 2 - cue 1, has a defined color red and a gobo.

Fixture 2 stored on executor 3 - cue 1, has a defined position pan and tilt.

Figure 4: Fixture 1 and 2 before clone

Let´s assume, you will clone fixture 1 at 2 and fixture 2 should make exactly the same like fixture 1.

The console will ask you to choose the clone method.

2. Tap Overwrite .

Figure 5: Fixture 1 and 2 after clone

Fixture 2 has now the exactly the same values as fixture 1. All previous defined values are deleted.

Fixture 1 and 2 are on executor 2. Fixture 2 does not exist anymore on executor 3.