MA lighting dot2 User Manual page 343

7.70. Settings of Executor View
Settings of Executor View
To go to the
the Executor Bar Window.
Figure 1: Settings of Executor Window
In this view, you can set different settings for the executor.
To select the function of an executor, tap at the executor displayed in the view. The
Window opens.
Chaser
To set the executor to a chaser, tap at the prohibition sign.
Hint:
You can identify that an executor is a chaser, if the executor in the
For more information about chasers, refer to
MIB (Move in black) late
To activate MIB (Move in black) late, tap at the prohibition sign.
If MIB is activated, MIB will be preposition attributes of fixtures that are fading in from zero. The preposition will be
activated before the dimmer is fading in from zero.
Example MIB on:
You have two cues. Cue 1 fixture 1 at full and cue 2 fixture 2 at full with pan/tilt position.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
tool
, tap the in the title bar of the
What are Chasers?
Cues View or tap on an executor in
Select Function of Executor
executor bar is displayed in blue.
343