MA lighting dot2 User Manual page 284

Figure 9: Fixtures use MAtricks Group 2
34. MAtricks Group 3:
Aligns the values across groups of 3 fixtures of the fixture selection.
- Select the MAtricks Group and then enter the align values.
Figure 10: Fixtures use MAtricks Group 3
35. MAtricks Group 4:
Aligns the values across groups of 4 fixtures of the fixture selection.
- Select the MAtricks Group and then enter the align values.
Figure 11: Fixtures use MAtricks Group 4
36. MAtricks Odd:
Selects every second fixture of the current fixture selection, starting with the first fixture.
Next and Previous Key function changes into a toggle function between even and odd.
Reset the Next and Previous Key back to default by using
37. MAtricks Odd ID:
Selects only fixtures with an odd fixture ID of the current fixture selection.
Next and Previous Key selects next and previous odd fixture ID.
Reset the Next and Previous Key back to default by using
38. MAtricks RESET:
Resets the Next and Previous key back to their default function.
This is necessary after using MAtricks macros.
39. Off all Executor:
Turns off all executors except the main executor.
40. Off Pages Minus Current:
Turns off every page except the current visible page in the
41. Oops Menu:
Opens the Oops View on screen 1.
© 2016 MA Lighting Technology Gm bH | Dachdeck erstr. 16 | D-97297 W aldbüttelbrunn | Germ any
Phone +49 5251 688865-27 | support (at) m a-dot2.com | www.m alighting.com
d o t 2 U s e r Ma n u a l
Macro 36 MAtricks
Macro 36 MAtricks
executor bar.
RESET.
RESET.
284