Profile (Radius Service Profile) - Proxim Orinoco AP-2500 User Manual

Public Space Parameters
• You can use this parameter to differentiate between multiple APs in the RADIUS accounting logs.
• Also, the RADIUS server can alter a user's access policy depending on the NAS identifier. For example,
the maximum session time could be reduced if the NAS identifier is "restaurant" instead of "library."
10. To send the NAS IP address with your account request, place a check mark in the Send NAS IP box.
11. To send a NAS port type with your account request, check the box for Send NAS Port Type, then define the
NAS port in the RADIUS NAS Port Type field.
12. Place a check mark in the Send Framed IP box if you want to include the IP address assigned to the client in
the messages sent to RADIUS server.
13. You can use this parameter to help identify the IP address assigned to clients in the RADIUS accounting logs.
If using IP Upsell, you can also see how many clients are using public IP addresses.
14. Place a check mark in the Enable URL Redirection box if you configured the Nomadix-URL-Redirection
VSA.
15. Place a check mark in the Goodbye URL On box to enable the display of a post-session Goodbye page. The
Goodbye page can be defined as a Radius VSA or through the Internal Web Server.
16. If required, check the box for AAA RADIUS Terminate End of Day to allow business policies that want to
terminate the session at midnight of every day.
17. If required, check the box for AAA Enable Byte Count Reset on Acct Start to reset the transmitted and
received byte count for a subscriber once an "accounting start" is sent. This function prevents granting Walled
Garden traffic if the billing plan is using bytes sent/received as a charge criterion.

Profile (Radius Service Profile)

You can configure a RADIUS service profile on the Configure > Public Space > AAA > Profile screen. Currently,
only one RADIUS service profile can be configured. A service profile defines a certain RADIUS configuration.
Creating a RADIUS Service Profile
Follow these steps to create a RADIUS service profile:
1. Login to the AP's Web browser interface.
2. Click Public Space > AAA > Profile.
Figure 5-17 Profile page (Radius Service Profiles)
3. Click the Add button to add a RADIUS service profile. After configuring the following parameters, select the
Create radio button then click OK to add the profile.
134