Radius Messages And Radius Attributes - Proxim ORiNOCO AP-2500 User Manual

Proxim network router user guide
Hide thumbs Also See for ORiNOCO AP-2500:
Table of Contents

Advertisement

Network Parameters
Data Volume Information Transmission (bytes sent/received)
The AP's RADIUS client implementation allows a hotspot operator to accurately track the exact number of bytes sent
and received by a subscriber based on:
User Name
IP address (Framed IP)
MAC address of the user (Calling Station ID)
As shown in the
Sample RADIUS
"Stop" messages. As mentioned previously, Accounting "Stop" messages can be generated by:
An explicit customer logout (via ICC or by typing http://1.1.1.1/)
Session time-out
Idle time-out
Deleting the user from the AP's
The message will indicate the type of action that initiated the Accounting "Stop". To ensure accuracy, the AP
temporarily saves the Accounting information per user in case of a device reboot.

RADIUS Messages and RADIUS Attributes

The AP-2500's RADIUS functionality can be broken down into the following categories:
Access-Request
Access-Accept Parsing
Acct-Request
Access-Request Attributes
Username
Included if enabled.
Password
Service-Type
NAS-Port (communication port number)
NAS-Identifier
Included if enabled on AP; see
Framed-IP
The subscriber's IP address.
Included if enabled on AP; see
Called-Station-Id
The AP's MAC address.
Calling-Station-Id
The subscriber's MAC address.
NAS-IP
The AP's IP address
NAS-Port-Type
Included if enabled on AP; see
Acct-Session-ID
The Acct-Session-ID is created when the RADIUS authentication request is built. It is transmitted in both
the Access-Request and the Accounting-Request.
State
Used for challenge/response authentication; since the AP uses the Password Authentication Protocol
(PAP) for authentication purposes, this attribute is not currently in use.
Transmissions, the byte counts are sent in the Accounting "Alive" and Accounting
Current Subscribers
Table.
RADIUS Configuration Parameters
RADIUS Configuration Parameters
RADIUS Configuration Parameters
>
Miscellaneous
Options.
>
Miscellaneous
Options.
>
Miscellaneous
Options.
91

Advertisement

Table of Contents
loading

Table of Contents