Wireless Led; Ethernet Led; Rear Panel; Ethernet Port - Proxim Skyline User Manual

Introduction 8

Wireless LED

The Wireless LED blinks green when the Access Point receives data packets over the
wireless network.

Ethernet LED

The Ethernet LED blinks green when the Access Point receives data packets over the

Ethernet port.

Rear Panel

Ethernet Port
This port connects the Access Point to your 10/100Base-TX Ethernet network using a
straight-through Ethernet cable.

Ethernet Link/Activity LED

The Link LED is lit solid green when the Access Point is connected at 100 Mbps to the
Ethernet network, and lit solid amber when connected at 10 Mbps. It will blink to
indicate activity on the Ethernet network.

Power Port

Connect the power supply for the Skyline 802.11a Access Point to the power port on
the back panel. The voltage range for the Access Point's power connector is 10-26
VDC. Proxim recommends that you use only the Class 2 power supply (12V, 1 Amp)
provided with the Skyline 802.11a Access Point.