Determining Your Hardware Variant; Status Page - Proxim ORiNOCO AP-4000MR-LR Quick Install Manual

ideNtifyiNg your Hardware VariaNt
You can verify which hardware version you are using through the HTTP
Interface, as described below.

status Page

On the Status page, locate the product ID and serial number at the top of the
page. If the serial number contains "FC" (as shown in the following figure), you
are using the FC hardware variant.
Configure > System Page
On the Configure > System page, locate the Descriptor field. If the field
contains "FC" (as shown in the following figure), you are using the FC hardware
variant.
All rights reserved Page 29