Using the Optional Harmony Power System
The optional Harmony Power System provides remote DC power to Harmony Access
Points over the unused pins of a Category 5 Ethernet cable. This product simplifies
Access Point installation: you only need to run a single cable to the Access Point to
provide both power and data.
However, the Harmony OpenAir Access Point must be attached to a Harmony AP
Power Over LAN Module Model 7059 to receive power and data from the Harmony
Power System.
Figure 3 illustrates how the AP Power Over LAN Module connects the Harmony
OpenAir Access Point to the Harmony Power System.
Figure 3
AP Power Over LAN Module
12