Simple Network Time Protocol (Sntp) - Proxim ORiNOCO AP-800 Software Management Manual

Configure the following parameters:
Parameter
IP Address
Host Port
Comment
Click Add, to add an entry in the SYSLOG Host Table.

6.4 Simple Network Time Protocol (SNTP)

SNTP allows you to synchronize the date and time of the device with the configured time servers. When this feature is
enabled, the device will attempt to retrieve the time of day information from the configured time servers (primary or
secondary) and, if successful, will update the relevant time objects in the device.
Navigate to MANAGEMENT > SNTP. The SNTP screen appears.
You can view and configure the following configurable parameters:
®
ORiNOCO 802.11n Access Points - Software Management Guide
Figure 6-22 SYSLOG Host Table Add Row
Enter the IP address of the SYSLOG server in the IP Address box.
Enter a Host Port in the range of 0 to 65535, in the Host Port box.
Enter any comments in the Comment box.
Description
Figure 6-23 SNTP
Device Management
112