Allied Telesis x510-28GTX Command Reference Manual page 413

L C
OGGING OMMANDS
( )
LOG EXTERNAL FILTER
Default By default the external log has a filter to select messages whose severity level is
"notices (5)" or higher. This filter may be removed using the no variant of this
command.
Mode Global Configuration
Examples To add a filter to send all messages generated by EPSR that have a severity of
notices or higher to the external log, use the following commands:
awplus#
awplus(config)#
To add a filter to send all messages containing the text "Bridging initialization" to
the external log, use the following commands:
awplus#
awplus(config)#
To remove a filter that sends all messages generated by EPSR that have a severity
of notices or higher to the external log, use the following commands:
awplus#
awplus(config)#
To remove a filter that sends all messages containing the text "Bridging
initialization" to the external log, use the following commands:
awplus#
awplus(config)#
Related clear log external
Commands
default log external
log external
log external exclude
log external rotate
log external size
show log config
show log external
unmount
Command Version 5.4.7-1.1: command added
changes
C613-50170-01 Rev B
configure terminal
log external level notices program epsr
configure terminal
log external msgtext Bridging initialization
configure terminal
no log external level notices program epsr
configure terminal
no log external msgtext Bridging initialization
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
413