Create Authen_Login Method_List_Name <String 15 - D-Link xStack DGS-3620 Reference Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
create authen_login method_list_name <string 15>
Parameters
<string 15> - Enter the user-defined method list name.
Restrictions
Only Administrator-level users can issue this command.
Example
To create a user-defined method list for user login:
DGS-3620-28PC:admin#create authen_login method_list_name login_list_1
Command: create authen_login method_list_name login_list_1
Success.
DGS-3620-28PC:admin#
4-7 config authen_login
Description
This command is used to configure a user-defined or default method list of authentication methods
for user login. The sequence of methods will affect the authentication result. For example, if the
sequence is TACACS+ first, then TACACS and local, when a user trys to login, the authentication
request will be sent to the first server host in the TACACS+ built-in server group. If the first server
host in the TACACS+ group is missing, the authentication request will be sent to the second server
host in the TACACS+ group, and so on. If all server hosts in the TACACS+ group are missing, the
authentication request will be sent to the first server host in the TACACS group. If all server hosts
in a TACACS group are missing, the local account database in the device is used to authenticate
this user. When a user logs in to the device successfully while using methods like
TACACS/XTACACS/TACACS+/RADIUS built-in or user-defined server groups or none, the "user"
privilege level is assigned only. If a user wants to get admin privilege level, the user must use the
"enable admin" command to promote his privilege level. But when the local method is used, the
privilege level will depend on this account privilege level stored in the local device.
Format
config authen_login [default | method_list_name <string 15>] method {tacacs | xtacacs |
tacacs+ | radius | server_group <string 15> | local | none}(1)
Parameters
default – Specify the default method list of authentication methods.
method_list_name - Specifies the user-defined method list of authentication methods.
<string 15> - Enter the user-defined method list of authentication methods. The method list
name can be up to 15 characters long.
method - Choose the desired authentication method:
63