Create Authen_Login Method_List_Name <String 15 - D-Link DGS-3120-24PC Manual

®
xStack DGS-3120 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To display system access authentication policy:
DGS-3120-24TC:admin#show authen_policy
Command: show authen_policy
Authentication Policy : Enabled
Authentication Policy Encryption: Enabled
DGS-3120-24TC:admin#
5-8 create authen_login
Description
This command is used to create a user-defined method list of authentication methods for user
login. The maximum supported number of the login method lists is 8.
Format
create authen_login method_list_name <string 15>
Parameters
<string 15> - The user-defined method list name. This value can be up to 15 characters long.
Restrictions
Only Administrator-level users can issue this command.
Example
To create a user-defined method list for user login:
DGS-3120-24TC:admin# create authen_login method_list_name login_list_1
Command: create authen_login method_list_name login_list_1
Success.
DGS-3120-24TC:admin#
5-9 config authen_login
Description
Configure a user-defined or default method list of authentication methods for user login. The
sequence of methods will effect the altercation result. For example, if the sequence is tacacs+ first,
then tacacs and local, when user trys to login, the authentication request will be sent to the first
server host in tacacs+ built-in server group. If the first server host in tacacs+ group is missing, the
authentication request will be sent to the second server host in tacacs+ group, and so on. If all
server hosts in tacacs+ group are missing, the authentication request will be sent to the first server
host in tacacs group...If all server hosts in tacacs group are missing, the local account database in
the device is used to authenticate this user. When user logins the device successfully while using
69