Disable Ssh; Config Ssh Authmode; Show Ssh Authmode - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual

disable ssh

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable SSH:
DGS3100# disable ssh
Success.
DGS3100#

config ssh authmode

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the SSH authentication mode:
DGS3100# config ssh authmode publickey enable
Success.
DGS3100#

show ssh authmode

Purpose
Syntax
Description
Parameters
Restrictions
161
To disable SSH.
disable ssh
The disable ssh command disables SSH on the Switch.
None.
Only administrator or operator-level users can issue this command.
To configure the SSH authentication mode setting.
config ssh authmode publickey [enable | disable]
The config ssh authmode command configures the SSH
authentication mode for users attempting to access the Switch.
publickey [enable | disable] – Specifies that a publickey configuration
set on a SSH server is to be used for authentication.
Enables or disables SSH authentication on the Switch.
Only administrator or operator-level users can issue this command.
To display the SSH authentication mode setting.
show ssh authmode
The show ssh authmode command displays the current SSH
authentication set on the Switch.
None.
None.