Show 802.1P User_Priority - D-Link DGS-1210/ME series Reference Manual

Parameters
Restrictions
Example usage:
To configure 802.1 user priority on the Switch:

show 802.1p user_priority

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show 802.1p user priority:
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
6
7
<priority 0-7> − The 802.1p priority value (0 to 7) to map to one of
the Switch's four hardware priority classes of service.
<class_id 0-7> − The Switch's hardware priority class of service (0
to 7) to map to the 802.1p priority value specified above.
Only administrator or operator level users can issue this command.
DGS-1210-28P/ME:5# config 802.1p user_priority 2 0
Command: config 802.1p user_priority 2 0
Success.
DGS-1210-28P/ME:5#
To display the current mapping between an incoming packet's
802.1p priority value and one of the Switch's eight hardware priority
classes of service.
show 802.1p user_priority
The show 802.1p user_priority command displays the current
mapping of an incoming packet's 802.1p priority value to one of the
Switch's four hardware priority queues.
None.
None.
DGS-1210-28P/ME:5# show 802.1p user_priority
Command: show 802.1p user_priority
QOS Class of Traffic
Priority-0 -> <Class-1>
Priority-1 -> <Class-2>
Priority-2 -> <Class-1>
Priority-3 -> <Class-3>
Priority-4 -> <Class-4>
Priority-5 -> <Class-5>
Priority-6 -> <Class-6>
Priority-7 -> <Class-7>
DGS-1210-28P/ME:5#
3
3
205
2
2