6 Command Line Interface
show flash information
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To the flash information on the Switch:
DGS-1210-52MP> show flash information
Flash ID
: MX25L25635F
Flash size : 32MB
Partition
Used
Boot
1000000
Image1
9744416
Image2
9744416
FileSystem
315392
DGS-1210-52MP>
show ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display IP interface settings:
DGS-1210-52MP> show ipif
IP Setting Mode
Interface Name
Interface VLAN Name
IP Address
Subnet Mask
Default Gateway
To display the flash information on the Switch.
show flash information
The show flash information command displays the current flash
information on the switch.
None.
None.
Available
Use%
0
100
4411360
68
4411360
68
3616768
8
To display the configuration of an IP interface on the Switch.
show ipif [<ipif_name>]
The show ipif command displays the current IP address of the
switch.
<ipif_name> − Specifies the IP interface name to be displayed.
None.
: Static
: System
: default
: 10.90.90.90
: 255.0.0.0
: 0.0.0.0
1
4
5
1
4
5
D-Link Smart Managed Switch User Manual