Show Ports Security Addresses - Dell Networking 7048 Reference Manual

Field
Maximum
Trap
Frequency

show ports security addresses

Use the show ports security addresses command in Privileged EXEC mode to
display current dynamic addresses in locked ports.
Syntax
show ports security addresses {gigabitethernet
port-channel-number | tengigabitethernet unit/slot/port }
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Examples
The following example displays dynamic addresses for port channel number
1/0/1.
console#show ports security addresses Te1/0/1
Dynamic addresses: 83
Description
The maximum addresses that can be associated
on this port in Static Learning mode or in
Dynamic Learning mode.
Indicates if traps would be sent in case of
violation.
The minimum time between consecutive traps.
unit/slot/port
Address Table Commands
| port-channel
325