Adj 12.1 Finisher Alignment - Xerox DocuColor 2240 Service Manual

ADJ 12.1 Finisher Alignment

Purpose
Align IOT copy output with entrance to Finisher H Transport.
Adjustment
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Ensure H Transport is set correctly
5 mm
max.
Figure 1 H Transport Clearance
Copy in Exit
Figure 2 H Transport Gate Clearance
Initial issue
DC 3535/2240/1632
WARNING
(Figure 1) and (Figure 2).
H Transport Gate
10 mm
02/03
4-185
Repairs and Adjustments
ADJ 12.1