Rep 5.29 Dadf Left/Right Hinges (4265) - Xerox WorkCentre 4150 Service Manual

REP 5.29 DADF Left/Right Hinges (4265)

Parts List on PL 5.60
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Power off the machine. Disconnect the power cord.
2. Remove the DADF from the machine
level surface.
NOTE: The DADF Left and Right Hinges are different parts, and are spared separately.
Repairs and Adjustments
REP 5.29
WARNING
(REP 5.3) and place it upside-down on a clean,
3. Remove the DADF Left/Right Hinges
2
Remove the particular hinge
from the machine.
Figure 1 Removing the DADF Left/Right Hinges
Replacement
1. Reinstallation is the reverse of the Removal procedure.
January 2016
4-92 WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/
(Figure 1).
1
Remove the four hinge mounting screws.