Acx6160 Dc Power Supply Leds - Juniper ACX6160 Hardware Manual

NOTE: The DC power supply has four terminals labeled V-, V-, V+, and V+ (see
page 20) for connecting DC power source cables labeled positive (+) and negative (–).
Figure 13: ACX6160 DC Power Supply Faceplate
Shunt negative input terminals (-48V)
1
—
Shunt positive input terminals (+RTN)
2
—
3 Terminal block
—
4 Latch lever
—
CAUTION: To avoid electrical injury, carefully follow instructions in
ACX6160 to Power" on page
71.

ACX6160 DC Power Supply LEDs

Figure 13 on page 20 shows the location of the LEDs on the DC power supply.
ESD grounding point
5
—
Fault LED (!)
6
—
7 Output LED (OUT)
—
8 Input LED (IN)
—
54, "Maintaining the ACX6160 Power Supplies" on page
Figure 13 on
"Connecting the
20