Mx480 Craft Interface Description - Juniper MX480 Hardware Manual

Table 5: MX480 Router Hardware Components and CLI Terminology (continued)
Component
Power supply blank
panel
SEE ALSO
MX480 DPC Port and Interface Numbering | 112
MX480 MIC Port and Interface Numbering | 137
MX480 PIC Port and Interface Numbering | 123
MX Series Router Interface Names

MX480 Craft Interface Description

The craft interface allows you to view status and troubleshooting information at a glance and to perform
many system control functions. It is hot-insertable and hot-removable. The craft interface is located on
the front of the router above the card cage and contains LEDs for the router components, the alarm relay
contacts, and alarm cutoff button. See
Figure 4: Front Panel of the Craft Interface
NOTE: At least one SCB must be installed in the router for the craft interface to obtain power.
Hardware Model Number
PWR-BLANK-MX480
Figure 4 on page
CLI Name Description
N/A "MX480 Power System Description" on
page 45
36.
36