M40E Craft Interface Description; Figure 21: M40E Craft Interface; Table 6: States For M40E Mcs Leds - Juniper M40E Hardware Manual

M40e Multiservice Edge Router Hardware Guide
Related
Documentation

M40e Craft Interface Description

Figure 21: M40e Craft Interface

34
All manuals and user guides at all-guides.com

Table 6: States for M40e MCS LEDs

Label Color
Blue
MASTER
Green
OK
Yellow
FAIL
M40e Miscellaneous Control Subsystem (MCS) Description on page 31
M40e Chassis Description on page 8
Installing an MCS in an M40e Router on page 181
The craft interface provides status and troubleshooting information at a glance and has
buttons for deactivating alarms and preparing FPCs for removal. The craft interface is
located on the front of the chassis above the FPC card cage, as shown in "M40e Chassis
Description" on page 8. It includes the elements shown in Figure 21 on page 34.
State Description
On steadily MCS is master.
On steadily MCS is functioning normally.
Blinking MCS is starting up.
On steadily MCS has failed.
Copyright © 2010, Juniper Networks, Inc.