Set Igmp Querier Timer Expiry; Set Igmp Querier Query-Interval - NETGEAR M6100 Series Reference Manual

no set igmp querier
Use this command to disable IGMP Snooping Querier on the system. Use the optional
address parameter to reset the querier address to 0.0.0.0.
Format
no set igmp querier [vlan-id] [address]
Mode Global Config
VLAN Mode

set igmp querier query-interval

Use this command to set the IGMP querier query interval time. It is the period in seconds,
from 1–1800 seconds, that the switch waits before sending another general query.
Default disabled
Format
set igmp querier query-interval seconds
Mode Global Config
no set igmp querier query-interval
Use this command to set the IGMP querier query interval time to its default value.
Format
no set igmp querier query-interval
Mode Global Config

set igmp querier timer expiry

Use this command to set the IGMP querier timer expiration period in seconds, from 60–300
seconds. This is the period that the switch remains in non-querier mode after it has
discovered a multicast querier in the network.
Default 60 seconds
Format
set igmp querier timer expiry seconds
Mode Global Config
no set igmp querier timer expiry
Use this command to set the IGMP querier timer expiration period to its default value.
Format
no set igmp querier timer expiry
Mode Global Config
M6100 Series Switches
Switching Commands
522