Show Radius Servers - NETGEAR M6100 Series Reference Manual

Term
Number of Configured Authentication
Servers
Number of Configured Accounting
Servers
Number of Named Authentication
Server Groups
Number of Named Accounting Server
Groups
Number of Retransmits
Time Duration
RADIUS Accounting Mode
RADIUS Attribute 4 Mode
RADIUS Attribute 4 Value
Command example:
(NETGEAR Switch) #show radius
Number of Configured Authentication Servers............. 32
Number of Configured Accounting Servers................. 32
Number of Named Authentication Server Groups............ 15
Number of Named Accounting Server Groups................ 3
Number of Retransmits................................... 4
Time Duration........................................... 10
RADIUS Accounting Mode.................................. Disable
RADIUS Attribute 4 Mode................................. Enable
RADIUS Attribute 4 Value ............................... 192.168.37.60

show radius servers

This command displays the summary and details of RADIUS authenticating servers
configured for the RADIUS client.
Format
show radius servers [ipaddr | dnsname | name [servername]]
Mode Privileged EXEC
M6100 Series Switches
Definition
The number of RADIUS Authentication servers that are configured.
The number of RADIUS Accounting servers that are configured.
The number of configured named RADIUS server groups.
The number of configured named RADIUS server groups.
The configured value of the maximum number of times a request packet is
retransmitted.
The configured timeout value, in seconds, for request retransmissions.
A global parameter to indicate whether the accounting mode for all the servers is
enabled or not.
A global parameter to indicate whether the NAS-IP-Address attribute has been
enabled to use in RADIUS requests.
A global parameter that specifies the IP address to be used in the
NAS-IP-Address attribute to be used in RADIUS requests.
Management Commands
126