Ip Vrrp Accept-Mode; Ip Vrrp Authentication - NETGEAR M6100 Series Reference Manual

ip vrrp accept-mode

Use this command to allow the VRRP Master to accept ping packets sent to one of the virtual
router's IP addresses. The parameter vrid is the virtual router ID which has an integer value
range from 1 to 255.
Note: VRRP accept-mode allows only ICMP Echo Request packets. No
other type of packet is allowed to be delivered to a VRRP address.
Default disabled
Format
ip vrrp vrid accept-mode
Mode Interface Config
no ip vrrp accept-mode
Use this command to prevent the VRRP Master from accepting ping packets sent to one of
the virtual router's IP addresses. The parameter vrid is the virtual router ID which has an
integer value range from 1 to 255.
Format
no ip vrrp vrid accept-mode
Mode Interface Config

ip vrrp authentication

This command sets the authorization details value for the virtual router configured on a
specified interface or range of interfaces. The parameter none or simple specifies the
authorization type for virtual router configured on the specified interface. The parameter key
is optional and is only required when authorization type is a simple text password. The
parameter vrid is the virtual router ID which has an integer value ranges from 1 to 255.
Default no authorization
Format
ip vrrp vrid authentication {none | simple key}
Mode Interface Config
no ip vrrp authentication
This command sets the default authorization details value for the virtual router configured on
a specified interface or range of interfaces. The parameter vrid is the virtual router ID which
has an integer value ranges from 1 to 255.
Format
no ip vrrp vrid authentication
Mode Interface Config
M6100 Series Switches
Routing Commands
685