Dhcp L2Relay Remote-Id Vlan; Dhcp L2Relay Subscription - NETGEAR M6100 Series Reference Manual

dhcp l2relay remote-id vlan

This parameter sets the DHCP Option-82 Remote ID for a VLAN and subscribed service
(based on subscription-name).
Format
dhcp l2relay remote-id remote-id-string vlan vlan-list
Mode Global Config
Parameter Description
vlan–list The VLAN ID. The range is 1–4093. Separate nonconsecutive IDs with a comma (,) no spaces and
no zeros in between the range. Use a dash (–) for the range.
no dhcp l2relay remote-id vlan
This parameter clears the DHCP Option-82 Remote ID for a VLAN and subscribed service
(based on subscription-name).
Format
no dhcp l2relay remote-id vlan vlan-list
Mode Global Config

dhcp l2relay subscription

This command enables relaying DHCP packets on an interface or range of interfaces that fall
under the specified service subscription. The subscription-string is a character string
that must be matched with the configured DOT1AD subscription-string for correct operation.
Default disabled (that is, no DHCP packets are relayed)
Format
dhcp l2relay subscription-name subscription-string
Mode Interface Config
no dhcp l2relay subscription
This command disables relaying DHCP packets that fall under the specified service
subscription. The subscription-string is a character string that must be matched with
the configured DOT1AD subscription string for correct operation.
Format
no dhcp l2relay subscription-name subscription-string
Mode Interface Config
M6100 Series Switches
Switching Commands
482