Area Stub (Ospf); Area Stub No-Summary (Ospf); Area Virtual-Link (Ospf) - NETGEAR M6100 Series Reference Manual

area stub (OSPF)

This command creates a stub area for the specified area ID. A stub area is characterized by
the fact that AS External LSAs are not propagated into the area. Removing AS External LSAs
and Summary LSAs can significantly reduce the link state database of routers within the stub
area.
Format
area area-id stub
Mode Router OSPF Config
no area stub
This command deletes a stub area for the specified area ID.
Format
no area area-id stub
Mode Router OSPF Config

area stub no-summary (OSPF)

This command configures the Summary LSA mode for the stub area identified by area-id.
Use this command to prevent LSA Summaries from being sent.
Default disabled
Format
area area-id stub no-summary
Mode Router OSPF Config
no area stub no-summary
This command configures the default Summary LSA mode for the stub area identified by
area-id.
Format
no area area-id stub no-summary
Mode Router OSPF Config

area virtual-link (OSPF)

This command creates the OSPF virtual interface for the specified area-id and neighbor.
The neighbor parameter is the Router ID of the neighbor.
Format
area area-id virtual-link neighbor
Mode Router OSPF Config
M6100 Series Switches
Routing Commands
708