Dos-Control Tcpsyn; Dos-Control Tcpsynfin - NETGEAR M6100 Series Reference Manual

Default disabled
Format
dos-control tcpoffset
Mode Global Config
no dos-control tcpoffset
This command disabled TCP Offset Denial of Service protection.
Format
no dos-control tcpoffset
Mode Global Config

dos-control tcpsyn

This command enables TCP SYN and L4 source = 0-1023 Denial of Service protection. If the
mode is enabled, Denial of Service prevention is active for this type of attack. If packets
ingress having TCP flag SYN set and an L4 source port from 0 to 1023, the packets will be
dropped if the mode is enabled.
Default disabled
Format
dos-control tcpsyn
Mode Global Config
no dos-control tcpsyn
This command sets disables TCP SYN and L4 source = 0-1023 Denial of Service protection.
Format
no dos-control tcpsyn
Mode Global Config

dos-control tcpsynfin

This command enables TCP SYN and FIN Denial of Service protection. If the mode is
enabled, Denial of Service prevention is active for this type of attack. If packets ingress
having TCP flags SYN and FIN set, the packets will be dropped if the mode is enabled.
Default disabled
Format
dos-control tcpsynfin
Mode Global Config
M6100 Series Switches
Switching Commands
564