Vlan Port Pvid All; Vlan Port Tagging All - NETGEAR M6100 Series Reference Manual

no vlan port ingressfilter all
This command disables ingress filtering for all ports. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the receiving interface
are admitted and forwarded to ports that are members of that VLAN.
Format
no vlan port ingressfilter all
Mode Global Config

vlan port pvid all

This command changes the VLAN ID for all interfaces. The number is a valid VLAN
identification number in the range 1–4093.
Default 1
Format
vlan port pvid all number
Mode Global Config
no vlan port pvid all
This command sets the VLAN ID for all interfaces to 1.
Format
no vlan port pvid all
Mode Global Config

vlan port tagging all

This command configures the tagging behavior for all interfaces in a VLAN to enabled. If
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is
transmitted as untagged frames. The number is a valid VLAN identification number in the
range 1–4093.
Format
vlan port tagging all number
Mode Global Config
no vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to disabled. If
tagging is disabled, traffic is transmitted as untagged frames. The number is a valid VLAN
identification number in the range 1–4093.
Format
no vlan port tagging all number
Mode Global Config
M6100 Series Switches
Switching Commands
367