Show Mvrp Statistics - NETGEAR M6100 Series Reference Manual

Parameter Description
summary If the summary parameter is used, the command shows global MVRP information.
interface If the interface is specified as unit/slot/port, the command shows MVRP mode information for
that interface.
all If the interface is specified with the all parameter, the command shows a table containing MVRP
global mode and the mode for all interfaces.
Command example:
(NETGEAR Switch) #show mvrp summary
MVRP global state.............................. Disabled
MVRP Periodic State Machine state.............. Disabled
VLANs created via MVRP......................... 20-45, 3001-3050
Command example:
(NETGEAR Switch) #show mvrp interface 0/12
MVRP interface state........................... Enabled
VLANs declared................................. 20-45, 3001-3050
VLANs registered............................... none

show mvrp statistics

Use this command in Privileged EXEC mode to display MVRP statistics.
Format
show mvrp statistics [summary | unit/slot/port | all]
Mode Privileged EXEC
Parameter Description
summary If used with the summary parameter, the command shows global MVRP statistics.
interface If the unit/slot/port is specified, the command shows MVRP statistics for that interface.
all If used with the all parameter, the command shows a table containing MVRP statistics for all
interfaces on which MVRP is enabled.
Command example:
(NETGEAR Switch) #show mvrp statistics summary
MVRP messages received......................... 45
MVRP messages received with bad header......... 0
MVRP messages received with bad format......... 0
MVRP messages transmitted...................... 16
M6100 Series Switches
Switching Commands
442